Advertisement
13
Remember to include the drip
tray. If a Waste Overflow
System is fitted, empty this
and flush through with a small
amount of sanitisation fluid if
needed.
16
Borg & Overström
10
For this we recommend the use
of Bioguard Foam Descaler &
Sanitiser Spray.
Fit new filter. Turn on incoming
water supply and reconnect the
power.
Please note that this sanitisation fluid contains an
active caustic/alkaline agent.
Always use responsibly and with care remembering
that due to its alkaline nature unnecessary
concentrated/prolonged contact with any materials,
including metals, can cause damage. Always rinse
all contact surfaces after use with clean water.
Install & Operation Manual
11
5
mins
Pay particular attention to the
dispense faucets and the tap
levers. For this use Bioguard
External Sanitiser & Clear Spray
and Sanitising Wipes.
14
PINK
When the external cleaning
(minimum 5 minutes) is
completed, flush the machine
using the cold dispense lever
with clean water until the
dispense water runs clear.
Repeat briefly with the ambient
button.
17
Pre-flush the new filter to waste
using the ambient dispense lever
until the water appears clear
and is free of air. Flush through a
small amount of water to check
all functions.
22
12
5
mins
Attend to any cosmetic marks
with Bioguard Rejuvenator &
Protector as needed.
15
Turn off water and remove the
service filter. Retain service filter
for reuse.
Avoid skin contact and wear
protective gloves when
handling sanitisation fluids.
In the event of any skin
contact, flush immediately
with clean, cold water.
GB
Advertisement
