Introduction - JETI model Central Box 200 Manual

1 Introduction

The Central Box is a switchboard designed for the complete
management of servos in a model with an emphasis on safety. The
Central Box has a unique design that provides overload protection
at each servo output. The Central Box can manage two batteries
and fully supports the JETI EX telemetry system. Up to two receivers
with serial (PPM, EX Bus) output can be connected to the Central
Box. With JETI DC/DS transmitter, the full potential of the Central
Box can be used, such as an easy way to configure the Central Box,
EX telemetry, and very fast servo response.
2 EN
EN
100 100
ENGLISH