Configuring "Global" Network Settings - Guntermann & Drunck ControlCenter-Digital-288 Installation And Operation Manual

Initial configuration of network settings
Netmask:
Connection type:
7. Press to save your settings.
F2
Configuring «global» network settings
In complex networks, global network settings ensure that the matrix switch is avail-
able from all sub networks.
How to configure global network settings:
1. Press
Ctrl+Num
2. Press F11 to call the Configuration menu.
3. Select and press
Network
4. Select
Interfaces
5. Enter the following data under
Global prefer-
ences
Hostname:
Domain:
Gateway:
DNS Server 1:
DNS Server 2:
6. Press to save your settings.
F2
18 · G&D ControlCenter-Digital-288
Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
Press to define if the network port and its communication
F8
partner are to negotiate the connection type automatically
( Auto ) or select one of the listed types.
(default) to open the on-screen display of the KVM matrix system.
.
Enter
and press .
Enter
Main Network
Select the operating mode by pressing
uses static settings.
 Static:
 DHCP: auto obtains the settings described below from a
DHCP server.
Enter the matrix switch hostname.
Enter the domain the matrix switch is to belong to.
Enter the gateway IP address.
Enter the DNS server IP address.
Enter the IP address of another DNS server (option).
:
:
F8