Matrix Switch "Controlcenter-Digital - Guntermann & Drunck ControlCenter-Digital-288 Installation And Operation Manual

Matrix switch »ControlCenter-Digital«
The matrix switch ControlCenter-Digital-288 is the central part of a KVM matrix system.
1 2 3
AC ok
DC ok
NOTE: A KVM matrix system lets you switch the KVM signals of a connected com-
puter (target) to a console within the system.
The video image of the accessed computer is displayed on the console monitor.
You can operate the computer with keyboard and mouse of the console.
You can equip the matrix switch ControlCenter-Digital-288 with up to 18 IO cards.
Each IO card provides 16 Dynamic Ports to connect user modules or target modules.
You can use the 288 dynamic ports of a fully equipped matrix switch to connect
either user modules or target modules.
NOTE:
The chapter Modular design of the matrix switch on page 7 provides detailed
information about the modular setup.
The matrix switch ControlCenter-Digital-288 is compatible with the matrix switches,
user modules and target modules of the DVICenter series. You can combine any
components of both series.
Status
Fail
Ident.
Function
USB
Network A Network B DisplayPort
Status
Fail Ctrl
Ident.
Fail Comm.
Matrix switch »ControlCenter-Digital«
Service
Bus IN
RS232 Service
Bus OUT
G&D ControlCenter-Digital-288 · 5