Monitoring And Troubleshooting Of Modules Without Display; 7-Inch Lcd Screen - janitza SVG Series User Manual

SVG 50/100
8.2

Monitoring and troubleshooting of modules without display

8.2.1 7-inch LCD screen

The 7-inch LCD screen is used for the central monitoring and troubleshooting of
modules without a display.
The external screen features a (800 x 400 pixel) color graphic display with a user friendly
user interface. Information on the voltage and current is displayed in realtime. It is easy to
check the power status and make the following parameter settings:
• Operating status of the SVG in realtime
• Status of the power grid in realtime
• Temperature of each module
• Record information,
• Alarm messages
• Version of the monitoring software
The user is shown the current status and the alarm information from the SVG and is able
to carry out all operating commands by selecting the corresponding buttons in the corre-
sponding menus.
After connection to the power supply, the SVG shows the start screen (see Figure 4-24)
and then automatically goes to the main menu (Figure 4-23).
Figure 4-24 Start screen of the SVG
60