Location Of The Current And Signal Interfaces - janitza SVG Series User Manual

5.2.4 Location of the current and signal interfaces

Network interface and interface for potential-free contact
Signal
interface
Figure 3-5 Location of the current and signal interfaces
DIP switch
Figure 3-6, Signal interface
The central 7-inch monitor is connected to the monitoring interface via the communication
cable. The 7-inch monitor is primarily used to configure the module without a display and
for error monitoring. A description of the CT and communication signals is provided in
Table 3-1.
Monitoring interface
SVG 50/100
Power terminals
PE terminal
23