System Operation; Monitoring And Troubleshooting Of Models With Lcd 8.1.1 4.3-Inch Lcd Screen - janitza SVG Series User Manual

SVG 50/100
8.

System operation

8.1 Monitoring and troubleshooting of models with LCD
8.1.1 4.3-inch LCD screen
The 4.3-inch screen on the front plate of the module makes it possible to display
information on the voltage and current in realtime. It is easy to check the power status and
make parameter settings.
This section describes the information, parameters and operation as well as control via the
LCD display.
The module has a 4.3-inch color graphic display with a user friendly user interface.
• The user is shown the current status and the alarm information from the SVG and is
able to carry out all operating commands by selecting the buttons in the corresponding
menus.
• A query of the historical alarms provides information for troubleshooting.
• Version information on the system-controlled software and the internal monitoring soft-
ware can be displayed via the LCD.
After connection to the power supply, the SVG shows the start screen (see Figure 4-1) and
then automatically goes to the main menu (Figure 4-2).
The main menu shows the THD and effective values for all phases on the grid and load
sides. In addition, the buttons "Home", "Data", "Parameters", "Measurement", "ON" and
"OFF" are also available:
Figure 4-1 Screen after starting the SVG
Figure 4-2 Main menu after powering
on the SVG
44