The "Measurement" Button - janitza SVG Series User Manual

SVG 50/100
• Close the "Parameters" main menu using the "Exit" button in the Parameters menu
(Figure 4-13). Log in again with your password for every new change of the parameter
settings.
• The "Home" button takes you to the main menu (Figure 4-2).
• Start the SVG using the "ON" button.
Answer the subsequent confirmation question
- With "ON" - the SVG is switched on;
- With "OFF" – the SVG remains in the idle state ("Stop" status).

8.1.4 The "Measurement" button

• The "Measurement" button to the left in the main menu takes you to the Records menu
(Figure 4-19).
Figure 4-19 Records menu
• The "Alarm" button (Figure 4-19) takes you to the "Alarm" menu (Figure 4-20); pressing
the "Active" (Figure 4-20) or "Previous Messages" button (Figure 4-21) displays the
active or historical alarms.
Figure 4-20 Active alarm
54
Figure 4-21 Previous messages