Information On Setting Up The Device; Information On Storage - janitza SVG Series User Manual

2.6

Information on setting up the device

• Do not set up the device in areas with high air humidity.
• Do not keep it in the proximity of flammable liquids, gases or explosive materials.
• Ensure there is enough space in front of and behind the system for adequate ventilation
and/or for maintenance work.
• To ensure safe operation of the SVG and prevent overheating:
- Provide adequate air circulation in your installation environment and cooling, as need-
ed, when the temperatures are high.
- The air inlets and outlets must not be blocked.
• Reduce the risk of fire or electric shock.
• Ground the device!
• When installing wiring, bear the balancing capacitance and the current-carrying capacity
in mind.
• Ensure that there is no corrosive gas or electrically conductive dust in the work environ-
ment.
• The operating temperature must lie in a range between-10° C and 40° C.
The internal temperature monitoring switches the SVG off if a temperature limit value is
exceeded.
• When using a forklift or other aids for transporting the device, the load-bearing capacity
must be adequate. Check the weight of the SVG as defined in Appendix 2.
2.7

Information on storage

• Store the SVG in its original packaging in a dry, well ventilated room.
• Storage at a temperature of -40° C to 70° C and a relative humidity between 5% and
95 % must be maintained.
SVG 50/100
9