Choosing The Blade - Promac 347V Operating Instructions And Parts Manual

Fig 3
To cut a long work piece, use roll
stand to support it.
30
50
115 max
30
40
115 max
25x35
40x50
115x153 max
Choosing the Blade Fig 4
1. Never use bands which are
damaged or deformed.
2. Never clean the saw band whilst it is
in motion.
The choice of the right blade with its
own toothing which depends on the
type of material that you want to cut,
and on its standard. Your band saw is
fitted with a 1325mm x 13mm, 0.65mm
thick metal blade.
However, blades with 6 or 14 teeth per
inch are also available for special
cutting requirements, indicated in the
"cutting table" (Fig 4).
8/12 30x s.1
6 40x s2
6 50x s.5 max
8/12 30x s.1
6 50x s.2
6
8/12
6
6
9
14
14
8/12
14
14
Fig 4