Table of Contents
Advertisement
Controls and Indicators
Material to be cut
The tool is intended to cut matter
material like steel. Iron, copper, etc.
Never use this tool to cut wood and
explosive metal materials.
Use a correct plug
As different countries may use
different plug, so the user shall install
the right plug approved by the local
official.
Grounding instructions
In the event of a malfunction or
breakdown, Grounding provides a path
of least resistance for Electric current
to reduce the risk of electric shock.
This tool is equipped with an electric
cord having an equipment-grounding
conductor and a grounding plug. The
plug must be plugged into a matching
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances.
Do not modify the plug provided - if it
will not fit the outlet, have the proper
outlet installed by a qualified
electrician. Improper connection of the
Equipment-grounding conductor can
result in a risk of electric shock. The
conductor with Insulation having an
outer surface that is green with or
without yellow stripes is the
equipment-grounding conductor. If
repair or replacement of the electric
cord or plug is necessary, do not
connect the Equipment-grounding
conductor to a live Terminal. Check
with a qualified electrician or service
Personal if the grounding instructions
are not completely understood, or if in
doubt as to whether the tool is properly
grounded.
Running in the blade
To safe guard the life and quality of a
new blade, the first two or three cuts
must be made exerting slight pressure
on the work piece so that the cutting
time is almost twice the one normally
needed (see cutting table).
Correct positioning of the piece in
the clamp
Work pieces to be cut must always be
held firmly in the clamp, directly
between the two jaws and without
inserting other objects. Were profiles,
flat bars or particular shapes to be cut,
refer to the examples shown in (Fig 3).
8
Advertisement
Table of Contents
Troubleshooting
