Warning - Promac 347V Operating Instructions And Parts Manual

1. Read and understand the entire owner's manual before attempting assembly or operation.
2. Read and understand the warnings posted on the machine and in this manual. Failure to
comply with all of these warnings may cause serious injury.
3. Replace the warning labels if they become obscured or removed.
4. This band saw is designed and intended for use by properly trained and experienced
personnel only. If you are not familiar with the proper and safe operation of a band saw, do
not use until proper training and knowledge have been obtained.
5. Do not use this band saw for other than its intended use. If used for other purposes,
PROMAC, disclaims any real or implied warranty and holds itself harmless from any injury
that may result from that use.
6. Always wear approved safety glasses/face shields while using this band saw. Everyday
eyeglasses only have impact resistant lenses; they are not safety glasses.
7. Before operating this band saw, remove tie, rings, watches and other jewelry, and roll sleeves
up past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or
anti-skid floor strips are recommended. Do not wear gloves.
8. Wear ear protectors (plugs or muffs) during extended periods of operation.
9. Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contain chemicals known to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:

Lead from lead based paint.

Crystalline silica from bricks, cement and other masonry products.

Arsenic and chromium from chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well-ventilated area and work with approved
safety equipment, such as face or dust masks that are specifically designed to filter out
microscopic particles.
10. Do not operate this machine while tired or under the influence of drugs, alcohol or any
medication.
11. Make certain the switch is in the OFF position before connecting the machine to the power
supply.
12. Make certain the machine is properly grounded.
13. Make all machine adjustments or maintenance with the machine unplugged from the power
source.
14. Remove adjusting keys and wrenches. Form a habit of checking to see that keys and
adjusting wrenches are removed from the machine before turning it on.
15. Keep safety guards in place at all times when the machine is in use. If removed for
maintenance purposes, use extreme caution and replace the guards immediately.
16. Check damaged parts. Before further use of the machine, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting and any other conditions that may affect its operation. A guard or other
part that is damaged should be properly repaired or replaced.
4