Setting and Adjustment
Distance set bracket adjustment
If you have to cut several pieces
together at the same length, use the
set bracket L of (Fig 8) which is
provided with the band saw in order
to save times for repeating
measurements.
L
Fig 8
Blade guide adjustment
M
N
Your cutting machine is provided with
a sliding guide M of (Fig 9) with built-in
protection, which guides the part of the
blade necessary to make the cut, and
at the same time, protects the part of
the blade while not in use .To do this,
simply slacken the locking handle N of
(Fig 9) and slide the blade guide M of
(Fig 9), so as to bring it closer or
Fig 9
farther from the work piece that is set
to be cut.
P
Cutting angle adjustment
The band saw can cut a varying angle
from 0° to 60°. Slacken the locking
O
handle O of (Fig 10) and turn the bow-
saw P of (Fig 10) until the scale to the
desired angle. Then tighten the locking
handle after.
Fig 10
11