Table of Contents
Advertisement
Vitotronic 300, GW6B Operating
Time Program
The following explains how to input the settings for a
time program. The special features of individual time
programs are allotted to the relevant chapters.
You can set up a time program for the following functions:
H Central heating
H DHW heating
H DHW recirculation pump
The time program allows you to divide the day into
sections. These are called time phases. It is for you to
decide what happens in these time phases, e.g. whether
your rooms should be heated to the standard room
temperature.
H You can set the time program individually, to be the
same, or different, for every day of the week.
H You can select up to 4 time phases per day.
H For each time phase you select the start and end points.
H In the main menu, you can scan the time programs
under "Information" (see from page 48).
Setting a time program using central heating
"Heating circuit 1" as an example
The settings described in the following apply equally for
DHW heating and the DHW recirculation pump.
Setting time phases
Example
H Time program for "Monday"
H Time phase 1: 05:30 am to 09:00 am (05:30 h to 09:00 h)
H Time phase 2: 4:30 pm to 10:00 pm (16:30 h to 22:00 h)
In between these time phases the system heats
to a reduced temperature.
From the home screen tap the following buttons:
1.
2.
3. "Heating circuit 1"
4. "Time program heating"
5. "Mo"
6.
7.
for the start and end point of time phase 1.
The bar in the time diagram is adjusted.
Cancelling the setting of a time phase early
8.
for time phase 2
9.
for the start and end point of time phase 2.
The bar in the time diagram is adjusted.
10
to confirm
11.
Central Heating
.
17
Advertisement
Table of Contents
