Table of Contents
Advertisement
Central Heating - Single boiler system control
Comfort Function
Energy Saving Function
22
Setting "Comfort mode"
From the home screen tap the following buttons:
1. Heating circuit 1, 2 or 3 in the header to select the
required heating circuit.
2.
3.
for the required set room temperature in comfort
mode.
4.
to confirm. The frame around symbol
highlighted in gray.
H The rooms are heated to the required temperature.
H Provided your heating contractor has not altered the
settings, DHW is heated to the selected set temperature
first, before central heating begins.
H The DHW circulation pump is switched on (if installed).
Note: The standard set room temperature continues
to be shown in the standard menu.
Ending "Comfort mode"
H Again tap
.
or
H Automatically when the system switches to standard
heating mode in accordance with the time program
or
H Automatically after 8 hours
Note: If you want to make changes to this, contact your
local heating contractor.
Setting "Economy mode"
From the home screen tap the following buttons:
1. Heating circuit 1, 2 or 3 in the header for the required
heating circuit
2.
3.
to confirm. The frame around symbol
highlighted in gray.
Note: You can only enable this energy saving function
in standard heating mode.
Ending "Economy mode"
H Again tap .
or
H Automatically when the system switches to reduced
heating mode in accordance with the time program
Vitotronic 300, GW6B Operating
is
is
Advertisement
Table of Contents
