Graco Mini Fire-Ball 225 Series Instructions-Parts List Manual page 8

Installation
Models 246911, 246913, 253385 and 253386
(F . 3)
IG
1. Remove the fluid outlet adapter included with the
pump, and screw the holster (6) into the pump outlet
using thread sealant.
2. Models 246913 and 253386: Assemble the truck (7)
as shown in the parts drawing on page 17. Secure
the truck pail (10) to the truck base with the pointed
clamps (7d) and thumbnuts (7c).
3. Remove the cover from the pail of lubricant. Place
the pail of lubricant into the truck pail.
8
4. Secure the cover (4) on the pail with the three
thumbscrews (A).
5. Insert the pump riser tube through the top of the
cover (4). Lower the pump until it rests on the cover.
6. Assemble the gun (2b) and hose (2a), and connect
the hose to the pump fluid outlet.
7. Connect the nipple (2d) to the pump air inlet or air
regulator (9b) inlet, whichever is applicable. Con-
nect the quick-disconnect coupler (2c) to the air
supply hose.
2b
9b
2c
2d
4
A
7c, 7d
7
Model 253386 shown
F . 3
IG
2a
6
10
01514
309967A