Name And Function Of Each Part; Package Contents - Speco Intensifier O2iB50M Quick Installation Manual

Ip bullet camera
Hide thumbs Also See for Intensifier O2iB50M:
Table of Contents

Advertisement

Backlight
Shutter Speed
Noise Reduction
Audio Streaming
Audio
Compression
Audio
Data / Sample
Rate
Audio Input /
Output
Security
Network
Supported Protocol
Intelligent Video
Alarm Trigger
System
Video Buffer
Integration
Alarm events
Firmware Upgrade
Etc
Memory Slot
Power Source
Power
Physical
Consumption
Net Weight
LED's
Dimension(mm)
Operating
Temperature
Environment
Storage
Temperature
 Specifications are subject to change without prior notice for improvement.

2. NAME AND FUNCTION OF EACH PART

2.1 Package Contents

APPEARANCE
DSS, Corridor-view (in H.264), Mirror / V-Flip, etc.
WDR (Low / Middle / High)
1/4 ~ 1/2000
2D / 3DNR
Two-way, Full-Duplex
G.711
64Kbps / 8KHz
Microphone input / 1x Line-In, Line-Output / 1x Line-Out
Password protection
User access log
HTTPS encryption
HTTP, HTTPS, DNS, RTSP, RTP, TCP, UDP, ICMP, DHCP,
SNMP, IP-FILTER
Motion detection 12 x 12 blocks
Motion detection, External Input
5MB pre-alarm and post-alarm-180sec
External Alarm Output (Normal open / close Type)
Remote upgrade via network
1x Factory Reset Button
Micro-SD
DC 12V / 1.5A, PoE (Power over Ethernet) : 802.3af
Max. 5.0W with IR & HEATER On (External DC 12V used)
1060g (Camera Only)
Power, Network Connection
Ø98.5 x 262.5 Including Bracket
-10 degree ~ 50 degree Celsius (-14F ~ 122F)
-20 degree ~ 60 degree Celsius (-4F ~ 140F)
IP Camera x 1
Installation Guide x 1
Tapping screw (Ø4 x 30) x 4
Plastic anchor x 4
DESCRIPTION
4

Advertisement

Table of Contents
loading

Table of Contents