CLI procedures
backup <value>
file <value>
mode <value>
<savetype>
standby <value>
verbose
Getting Help
When you navigate the boot monitor and run-time CLI, Online Help is available at all levels.
From any level of the tree, you can access Help in one of the following four ways:
• Entering help <command> explains what the command does and gives its syntax.
• Entering help at the system prompt provides an explanation of the available help.
• Entering<command> syntax displays a list of commands and parameters available for
that command.
• Entering a question mark (?) at the prompt results in a list of all commands in that
command context and the subcontext of that command.
Modifying user access
EDM read-write community users can modify their usernames and passwords. You can adapt
the following example to restrict these users from modifying their usernames and
passwords.
36
User Interface Fundamentals
Variable
Saves the specified file name and identifies the file as a
backup file.
The file name.
CLI or ACLI
Specifies the type of file to save. The options are:
• config
• bootconfig
• log
• trace
• clilog
• snmplog
Saves the specified file name to the standby CPU.
Saves the default and current configuration. If you omit
the [verbose]parameter, only the current configuration is
saved.
Comments? infodev@avaya.com
Value
July 2013