Switching from ACLI to CLI for a single CPU from factory
defaults
Use the following procedure to change a single CPU from ACLI to CLI from factory defaults.
Procedure steps
1. Enter global configuration mode.
2. Enter the following command:
3. Enter the following command:
4. Boot the switch.
Switching from ACLI to CLI for a single CPU from existing
configuration
Use the following procedure to change a single CPU from ACLI to CLI from an existing
configuration.
Procedure steps
1. Save the configurations in CLI mode. The following is an example:
2. Enter global configuration mode.
3. Enter the following command:
4. Boot the switch.
User Interface Fundamentals
boot config flags factory
no boot config flags acli
The boot.cfg file is saved automatically.
save config file cli.cfg mode cli
no boot config flags acli
Switching from ACLI to CLI for a single CPU from factory defaults
July 2013
43