RGBlink FLEX 8 User Manual page 39

Adjust Layer: Two ways can change the size and location of the opened layer:
a. Drag the opened layer by mouse. The details are: move the mouse to the brink of
the opened layer, when the mouse shows"<—>", press the left key of the mouse and
drag the window to a suitable size and then release the mouse. Or move the mouse
to the lower right of the opened layer, press the left key of the mouse and drag the
window to a suitable size and then release the mouse. Move the mouse to the
opened layer and press the left key of the mouse and move the mouse, then the
layer will be moved, release the mouse when moved to the suitable location. But this
method can only adjust the size and location roughly, if an accurate adjustment is
needed, the second method can be used.
b. Select the layer to be adjusted, and set the X, Y, width and height in the bottom of
the interface.
Hierarchical relations between layers: After creating the layers, the hierarchical
relations can be changed by the following: click the shortcut key bring layer to front
" ", send layer to bottom "
" ". The layer can be set as background by click "
close layer background.
Close one layer or all layers: Click the icon
to close one layer, or click the shortcut key "
Lock the layer: Click the icon
layer, the layer can't be moved or adjusted if be locked.
Full the layer: Click the icon
click the icon
Copy and paste bank: Select the bank that to copy, and click the copy bank shortcut
" " on the right side of the interface, then select the bank that to paste, and
click the paste bank shortcut "
Adaptive: If scale the output area to a large area, click the adaptive shortcut "
on the right side of the interface, the output area will be return to the best position.
FLEX 8
on the top right corner of the layer to lock the
on the top right corner of the layer to full cell, and
to full screen.
". The selected layer will pasted to the bank.
", layer forward "
on the top right corner of the layer
" to close all layers.
User Manual
" or layer backward
" and click " " to
"
38