RGBlink FLEX 8 User Manual page 16

instruction as below
At this time, press any button among 1-8 in IN area, it means save to the corresponding
position of 1-8, i.e., press button 2 means save to SAVE 2.
Press any button among 1-8 in OUT area, it means save to corresponding position of 9-16,
i.e., press button 1 means save to SAVE9, button 7 means SAVE15.
LOAD
If the saved setting need to be recalled,press button LOAD，LCD will show as below
The button indicating saved position illuminates and the latest saved position flashes. For
example, in previous operation, there are 3 saved position, SAVE2, SAVE9, SAVE15,
SAVE15 is the latest one, button 2 in IN area, button 1 in OUT area illuminate and button 7
in OUT area flashes.
Press the above illuminating or flashing button to Load the corresponding SAVE.
POWER-STAND BY MODE
Press button POWER LCD shows the indication as follow:
In stand by mode, press POWER for 3S, all buttons flashes one by one immediately and
LCD shows
5S later, the device goes back to work and in the status before stand by.
FLEX 8
SAVE TO:_
LOAD FROM：_
ENTER STANDBY MODE
YES<ENTER>,NO<MENU>
RGBLINK
FLEX 8
User Manual
15