Advanced Chipset Features - Beckhoff CX50 0 Series Hardware Documentation

Operating/Configuration
Phoenix - AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
1. Ch0 M.
2. USB-HDD0
.
.
.
n. Bootable Add-in Cards
Boot Priority
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit [} 45] F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
1. Ch0 M. / 2. USB-HDD0 / ... / n. Bootable Add-in Cards
This is where the boot sequence for the HDD setting is specified. Use <↑>, <↓>, <PU> and <PD> to change
the boot sequence.
Boot Proirity
This is were the list behaviour is set:
Dynamic: New devices are appended at the end of the list.
Manual: The priority list is stored and remains unchanged as long as no new devices are connected.
Fixed: The boot sequence is fixed: 1. HDD CHx master 2.HDD CHx slave 3. USB-HDD devices
4.3.3

Advanced Chipset Features

This menu is used for memory functions settings. Such settings should be implemented cautiously since they
can affect the stability of the whole system.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable
System BIOS Cachable
Video BIOS Cachable
** On-Chip VGA Setting **
On-Chip Video Memory Size
On-Chip Frame Buffer Size
Current Configuration
Boot Type
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit [} 40] F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
50
Name
Name
[Dynamic]
[by SPD]
[Enabled]
[Disabled]
[128 MB]
[8 MB]
DVO
DVI
Version: 1.9
Item Help
Item Help
CX50x0