Pnp/Pci Configurations - Beckhoff CX50 0 Series Hardware Documentation

Passive TSP Value
This option is used to specified how often the system should analyse the temperature sensors. Values are
entered in 10th of a second.
Critical Trip Point
At this temperature the CPU is switched off in order to prevent damage.
4.3.6

PnP/PCI Configurations

This menu is used for configuring the PCI bus and Plug and Play Management.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Init Display First
Reset Configuration Data
Resources Controlled By
υ8; IRQ Resources [} 59]
PCI/VGA Palette Snoop
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit [} 40] F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Init Display First
This option can be used to specify which graphics card should be initialised first: either PCI slot, onboard or
PCIEx.
Reset Configuration Data
If activated, the option ensures that the BIOS deletes the information relating to built-in components and their
resources and reconfigures them (all settings are reset). Setting options: Enabled, Disabled.
Resources Controlled By
Specifies whether the PnP settings should be assigned via setup or automatically. Auto should be used, if
there are no problems with IRQ or DMA assignments. The default is auto.
IRQ Resources
If these resources are set manually, each system interrupt should be assigned a type, depending on the type
of device using the interrupt.
PCI/VGA Palette Snoop
Used by multimedia video cards. This function should be switched on (Enabled), depending on the card. It is
switched off by default.
4.3.6.1 IRQ Resources
This menu is used for disabling interrupts for free allocation to PCI slots.
Phoenix - AwardBIOS CMOS Setup Utility
CX50x0
[PCI Slot]
[Enabled]
[Manual]
[Press Enter]
[Disabled]
Version: 1.9
Operating/Configuration
Item Help
59