Concept2 SkiErg Replacement Manual page 2

Procedure
4. Position the knot of the handle cord into the
plug and wrap it around the plug as shown in
photos G and H.
Note: the difference in the new handle plug.
See photo I.
5. Install the plug into the bottom of the handle
and press into place. The new plug will be a
tight fit and will require a firm press to seat
fully.
See photos J and K.
6. Repeat for other handle.
Replacing SkiErg Handles
Page 2
G
NEW
I
J
1014
H
OLD
K
concept2.com/ski