Bosch MUZ9VLP1 Instruction Manual page 11

Caution!
Never place the universal blade, one of the
cutting discs or the citrus press on the tool
holder at the same time.
Notes:
– The universal mixer can only be placed
on the base unit once assembled and
with the lid closed.
– The maximum filling level must not be
exceeded. Keep checking during use!
Recommended speeds
1 Citrus press (only use on setting 1!)
5 Reversible slicing disc
7 Universal blade, reversible shred­
ding disc, grating disc –
medium­fine
Universal blade
r
Not suitable for use with this
z
accessory!
Universal blade
For mincing, puréeing, blending, kneading,
cutting and for making sauces and mixed
drinks.
W Risk of injury!
Do not touch the blades of the universal
blade with bare hands. Grasp the univer­
sal blade by the plastic only. When not
in use, always store the universal blade
in the blade guard.
Use
X Image sequence B
Important: Only prepare the base unit as
described in the main operating instruc­
tions. The accessory can only be operated
if the bowl is fitted properly.
1. Place the tool holder on the support in
the container and press down.
2. Place the universal blade on the tool
holder and press down.
3. Prepare your food. Add the food to be
processed to the feed chute. Observe
the maximum processing quantities and
filling level.
4. Attach the lid with the pusher (,).
MUZ9VLP1_EU_8001016029.indb 11
Universal blade
5. Rotate the lid in a clockwise direction
as far as possible (;). The catch lock
must be in full contact with the handle of
the container.
6. Position the universal mixer as
shown on the front yellow drive and
press down.
7. Rotate in a clockwise direction as far as
possible.
8. Plug the mains plug into the mains.
Turn the rotary switch to the recom­
mended speed.
9. Leave switched on until the required
consistency is achieved.
10. Move the rotary switch to y and wait
for the appliance to come to a standstill.
Disconnect the mains plug.
11. Rotate the universal mixer in an anti­
clockwise direction and remove.
12. Rotate the lid in an anticlockwise direc­
tion and remove.
13. Remove the universal blade and tool
holder.
14. Empty the container.
■ Clean all parts directly after use.
X "Cleaning and maintenance" see
page 13
Adding more ingredients
Caution!
Observe the maximum filling level. Finish
processing before the ingredients touch
the lid.
■ While the appliance is running, remove
the pusher and add the ingredients
through the feed chute.
■ To add large quantities or ingredients,
turn the rotary switch to y and wait for
the machine to come to a standstill.
■ Rotate the universal mixer in an anti­
clockwise direction and remove.
■ Remove the lid.
■ Add the extra ingredients.
■ Attach the lid. Replace the universal
mixer. Continue processing your
ingredients.
en
11
15.06.2016 10:36:29