Preceding Menus; Radio Menu; Autoset Menu - BFT NETTUNO B Installation And User Manual

PRECEDING MENUS

FIG. A
- +
+ -
OK
+ -
- +
+ -
- +
OK
+ -
- +
OK
+ -
- +
+ -
OK
+ -
Fig. B
1
OK
- +
OK
- +
OK
- +
OK
- +
OK
OK
- +
- +
- +
OK
- +
OK
- +
OK
2
P1 P1
Press P1 (pushbutton) on radio
control device.
Press the required T (key) on
radio control device – see Fig. B3
Press P1 (pushbutton) on radio
control device.
Press the required T (key) on
radio control device – see Fig. B3
Press the required T (key) on
radio control device – see Fig. B3
+ -
OK OK
OK

RADIO MENU

ADD - Allows you to add one key of a radio control
device to the receiver memory; after storage it displays
OK a m e s s a g e s h o w i n g t h e r e c e i v e r n u m b e r i n t h e
memory location (from 01 to 64).
Add Start button – associates the required key to
Start command
Add 2ch button – associates the required key to 2nd
OK
radio channel
R E A D - C h e ck s o n e key o n a r e c e i ve r, i f s t o r e d i t
displays a message showing the receiver number in the
memory location (from 01 to 64), and the key number
OK
(T1, T2, T3 or T4).
ERASE 64
WARNING! Completely removes all memorised radio
control devices from the receiver memory.
OK
COD RX
Displays the receiver code.
Make reference to paragraph 11.

AUTOSET MENU

OK It automatically sets the motor torque.
OK
WARNING! During the autoset phase, the obstacle
detection function is not active, therefore the installer
must control the automation movement and prevent
persons and things from approaching or standing
within the automation working range.
+
- +
stored device
-
3
T1 T2 T1 T2
T1
T2
T3
T4
Release P1 on radio
control device
Release P1 on radio
control device
OK
list of recognized devices
previous device
next device
NETTUNO B - Ver. 05 - 17
T1
T2
T3
T4