HK Audio COSMO Series Instructions For Use Manual page 7

COSMO Line Array – Instructions for use
2.4 Rigging and Transport Hardware
• CRF-80 rigging frame – art. no. 1007678
The multifunctional CRF-80 serves as a rigging frame for up to
twenty C 8 M/H units, or for arrays with the CF 118. The CRF-80
may also be used for ground stacks with up to six C 8 M/H units.
• CRF-60 rigging frame – art. no. 1007677
The multifunctional CRF-60 serves as a rigging frame for up to
fourteen C 8 M/H units, or for ground stacks with up to six C 8
M/H units.
• CRF-PB pull-back frame
– art. no. 1007679
The CRF-PB pullback frame serves to fl y cabinets in compressed
mode, to place up to two C 8 M/H units on speaker stands, or to
stack up to three C 8 M/H units.
• C-PPA pick-point adapter – art. no. 1007680
The pick-point adapter serves to attach chain hoists and other
suitable lifting devices to the rigging frame.
- 7 -
Operating Instructions 1.0
• C-M20 sub adapter
– art. no. 1007681
The C-M20 sub adapter serves to securely connect the rigging
frame or pullback frame to ground-stacked C SUB subwoofers.
• C-GSA ground stack adapter
– art. no. 1007682
The C-GSA ground stack adapter serves to connect ground-stacked
mid/high units to the rigging frame, and tilt the cabinets at angles
up to -20°.
• C-STR tensioning strap (not pictured)
This tensioning strap comes with a BSC (belt slip control) ratchet
for compressed mode rigging.
– art. no. 1007707