HK Audio COSMO Series Instructions For Use Manual page 37

COSMO Line Array – Instructions for use
10
Connect all further M/H units, one after the other, as described
in steps 7 to 9 above until all M/H units intended for this array
are connected.
Heads up: Always keep the area below the system
clear of people when raising or lowering it.
11
You may fasten ropes to the pull-back frame's attachment
points to tie the array to truss bars or the like to prevent it
from twisting in the wind.
Note: Use only ropes with suffi cient tensile strength to
this end. Carabiner or snap hooks are suitable for attaching
ropes.
- 37 -
Rigging Manual 1.0