HK Audio COSMO Series Instructions For Use Manual page 39

COSMO Line Array – Instructions for use
6
Now connect all M/H units required for the array to the adapter
frame as described in sections 5 and 6 of this rigging manual.
7
You may fasten ropes to the pull-back frame's attachment
points to tie the array to truss bars or the like to prevent it from
twisting in the wind.
Note: Use only ropes with suffi cient tensile strength to
this end. Carabiner or snap hooks are suitable for attaching
ropes.
Heads up: Always keep the area below the system
clear of people when raising or lowering it.
Heads up: Please bear in mind that the working load
limit is and will remain 700 kg. Using two CRF-80 rigging
frames does not double the WLL.
- 39 -
Rigging Manual 1.0