HK Audio COSMO Series Instructions For Use Manual page 12

COSMO Line Array – Instructions for use
Connecting subwoofers
Connect no more than two CS 118/CF 118 bass bins (or one CS 218
unit) to each channel. The recommended minimum electrical
impedance for each channel is 4 ohms.
Analog In
Lift Lift
Ground Ground
CH 1 CH 2 CH 3
PB-8
Thru
CH 1
2
AES3 Ethernet
Lift Lift
CH
1/2 1
1/2
Ground Ground
CH 1: 1+/–
CH 4
CH 2: 2+/–
3/4 2
MADE IN GERMANY
CH 2 CH 3
1 4 3
Amp Out
Amp Out
CH
3/4
CH
CH 2: 1+/– CH 3: 1+/– CH 4: 1+/–
CH 1: 2+/– CH 4: 2+/– CH 3: 2+/– 1/2/3/4
1+/– 2+/– 3+/– 4+/–
Parallel Out
LF signal
2+/–
CH 4
- 12 -
Operating Instructions 1.0
Using the COSMO multicore cable
• LSM Mid/High adapter (art. no. 1006166)
The LSM Mid/High adapter is a convenient way of connecting
larger systems. The LSM Mid/High adapter's NL4 pin assignments
are two poles to pin 1+/–. See section 5,"Example Setups," for
more on this.
0.60 m
NL4
1.20 m
NLT8MX
NL4
2.00 m
2.60 m
• LSM Sub adapter (art. no. 1006167)
The LSM Sub adapter is a convenient way of connecting larger
systems. The LSM Sub adapter's NL4 pin assignments are two
poles to pin 2+/–. The subwoofer's Pin Assignment switch has to
set to the 2+/– position.
LSM Sub 2+/–
5.00 m
5.00 m
NLT8MX
• NL8 Multicore
LSM 5 (art. no. 1007712) length 5 m
LSM 10 (art. no. 1007713) length 10 m
LSM 15 (art. no. 1007714) length 15 m
LSM 20 (art. no. 1006165) length 20 m
NLT8FX
NL4
NL4
NL4
NL4
5.00 m
NL4
5.00 m
NL4
NLT8FX