Table of Contents
Advertisement
Mounting and connecting
4
Connect the Climatix touch panel
Note:
4.3.2 Connect configuration PC
USB Connection
16 | 30
Siemens
Smart Infrastructure
Do not connect Climatix touch panel pin (0 V) directly to Ground of electrical panel
to avoid equalizing currents.
Ensure that the wires are connected to the correct polarities.
A configuration PC can:
●
Transfer a project
●
Reset the Climatix touch panel to factory settings
●
Back up, recover, or configure recipes
Use a USB cable to connect the configuration PC. The USB cable has a standard
USB Type B male connector on one end.
1. Connect the USB cable to the USB-A port
2. Connect the other end of the USB cable to the configuration PC.
on the Climatix touch panel.
A6V11348824_en--_a
2018-04-10
Advertisement
Table of Contents
