Table of Contents
Advertisement
DS-40
User's Guide
Light
Ready (Blue) and Wi-Fi
(Blue)
Ready (Blue), Wi-Fi (Blue),
and Low battery (Amber)
Note:
Remove the batteries from the product if you are going to use the product in USB mode for an extended period of time.
Indicator status when connecting using a wireless network
Light
Ready (Blue)
Ready (Blue) and Wi-Fi
(Blue)
Wi-Fi (Blue)
Low battery (Amber)
Ready (Blue) , Wi-Fi (Blue),
and Low battery (Amber)
Getting to Know Your Product
Indicator Status
Flashing (alternately)
Flashing (simultaneously)
Off
Indicator Status
Flashing
On
Ready is flashing and Wi-Fi
is on
Ready is on and Wi-Fi is
flashing.
Flashing (alternately)
Flashing (simultaneously)
Flashing
On
Off
Meaning
The firmware is being updated.
A paper jam has occurred. Set the document again.
"Problems Indicated by Status Light" on page 44
&
If the lights continue to flash, a fatal error may have occurred.
Contact your local dealer.
The product is off.
Meaning
❏
The product is initializing.
❏
The product is being calibrated or cleaned.
The product is ready to scan or the product is in direct Wi-Fi
connection mode.
The product is scanning or connecting to a wireless network.
A Wi-Fi protected setup (WPS) error or an AOSS error has occurred.
See the Troubleshooting section in the Network Guide for details
on wireless connection problems.
The product is in standby state for Wi-Fi connection or the
firmware is being updated.
A paper jam error has occurred.
"Problems Indicated by Status Light" on page 44
&
If the lights continue to flash, a fatal error may have occurred.
Contact your local dealer.
An AOSS security error has occurred. See the Troubleshooting
section in the Network Guide for details on wireless connection
problems.
The batteries are running low. Prepare new batteries.
The product is off.
14
Advertisement
Table of Contents
