Epson DS-40 User Manual page 20

DS-40 User's Guide
A
Slide the edge guide on the input slot all the way to the left.
B
Load your document with the printed side face down and the document edge aligned with the right edge of the
input slot until the top edge of the document is gripped by the product. If the product does not grip the
document, try loading it again.
C
Slide the edge guides to fit the edge of the document.
Note:
❏ You can only load one sheet at a time into the product.
❏ If your document has punch holes, load it so that the holes are on the left of the Input slot.
❏ If the paper is not taken in correctly when previewing or scanning, try sliding the paper gently into the scanner.
This completes the procedure for loading document. See the following sections for more information on scanning the
document.
"Scanning Using Document Capture Pro/Document Capture" on page 21
&
"Scanning Using Epson Scan" on page 24
&
Loading Document
20