Table of Contents
Advertisement
DS-40
User's Guide
B
Select your scanner from the Select Scanner drop-down list.
C
If you want to use the product using a wireless connection, select Network and then Add; if you want to use the
product using a USB connection, select Local.
If you are using a USB connection, skip step 4 and go to step 5.
D
In the Add window, choose the product's IP address under Search for addresses. Then click OK.'
Note:
You can add the product's IP address manually.
Select Enter address, type in the address, and then click OK.
E
In the Epson Scan Settings window, click Test to check the connection. If everything works properly, you see a
successful connection message appears.
F
Click OK to save the settings.
EpsonNet Config
This software allows advanced users to configure the network interface of the Epson product and use it on the network.
Software Information
32
Advertisement
Table of Contents
