Briggs & Stratton VANGUARD 810 EFI Repair Manual page 68

64
Step
1. Select the Dashboard ribbon and then the Main2 tab.
2. Observe Ignition Voltage display with or without the
1
engine running.
3. Is reading 9.0-15.0 volts DC?
2
Is reading below 9.0 volts DC?
DTC P0562 System Voltage Low
Scan Diagnostics
Action
Figure 2-53 Check Ignition Voltage Display.
Section 2: Troubleshooting DTCs
Yes
System
voltage OK.
Go to DTC P0562
Non-Scan
Diagnostics.
No
Go to step 2.
-