Briggs & Stratton VANGUARD 810 EFI Repair Manual page 103

Section 4: Symptoms
Step
Inspect governor spring and controls for dam-
age or improper installation.
11
Is a problem found?
Review diagnostic procedures in this table. If
all steps have been completed and no prob-
lems have been found, proceed as follows:
• Repeat visual check.
12
• Review Scan tool/Code reader data.
• Check all electrical connections within the
suspect circuit and/or system.
Is a problem found?
Carefully review data under ECM Connector
Symptoms, page 100.
13
Is a problem found?
Engine Hunts and Surges
(Page 2 of 2)
Action Yes
Repair Go to step 12.
Repair Go to step 13.
Contact engine
Repair
manufacturer.
99
No