One Lun/Two Lun Setting; Termination Setting; Change Of Setting; Audio Connector - Toshiba SD-W1111 Product Specification

Dvd-ram drive
Hide thumbs Also See for SD-W1111:
Table of Contents

Advertisement

TOSHIBA DVD-RAM SD-W1111

12.3.4 ONE LUN/TWO LUN setting

Open
Short
ONE LUN mode: The drive operates in one LUN (Logical Unit Number) for all discs to
TWO LUN mode: The drive operates in the following two LUNs.
LUN = 0:
LUN = 1:
(LUN = 0/1

12.3.5 Termination setting

Open
Short
When the termination enabled, the following circuit is connected to each SCSI signal.
I/F signal

12.3.6 Change of setting

The setting change should be carried out after turning off the power.

12.4 Audio Connector

When playing back a CD audio disc, the terminal develops the audio signal.
Pin No.
1
2
3
4
Connection should be done using a connector, part number:103959-3, manufactured by AMP or
equivalent one.
Pin 6
The drive operates in ONE LUN mode.
The drive operates in TWO LUN mode.
which SFF8090 Ver. 0.2 supports.
CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R disc (Device type = 5)
DVD-RAM disc (Device type = 7)
The selection of either 0 or 1 is switched according to a disc inserted.)
Pin 8
Termination disable.
Termination enable.
110
Signal
R
GND
GND
L
Page 25
Function
Function
2.85V
1
2
3
Product Specification
OD-A017-02
'99/06/26
1.0
Version
4

Advertisement

Table of Contents
loading

Table of Contents