Download  Print this page

Toshiba SD-R5112 Product Specification

Dvd-r/-rw drive
Hide thumbs

Advertisement

Quick Links

TOSHIBA
STORAGE DEVICE DIVISION
SD-R5112
DVD-R/-RW DRIVE

PRODUCT SPECIFICATION

MARCH 2003
REV. 1.0
Specifications are subject to change without notice
DOCUMENT NUMBER
16004

Advertisement

loading

  Also See for Toshiba SD-R5112

  Related Manuals for Toshiba SD-R5112

  Summary of Contents for Toshiba SD-R5112

  • Page 1: Product Specification

    TOSHIBA STORAGE DEVICE DIVISION SD-R5112 DVD-R/-RW DRIVE PRODUCT SPECIFICATION MARCH 2003 REV. 1.0 Specifications are subject to change without notice DOCUMENT NUMBER 16004...
  • Page 2: Limitation Of Liability

    Further, TOSHIBA disclaims all express warranties created by any individual or entity installing this device into a computer unless such express warranties are made with the prior express written consent of TOSHIBA or its authorized representatives.
  • Page 3 5. When you close the tray, power must not be turned off. If the tray is pushed in with the hand during power off, a breakdown may occur because the mechanism in the product is not in the transit state during power off. SD-R5112 Rev.1.0...
  • Page 4 3 +/- 0.5 mm When a large amount space is left, insert spacers, etc. to adjust the space less than 0.5 mm between the product and mounting bracket. this product after the fixing SD-R5112 Rev.1.0...
  • Page 5 Please take notice that unauthorized copying, modification, assignment, transmission and other disposition may be subject to claims for damages and to penalties. ----------------------------------------------------------------- SD-R5112 Rev.1.0...
  • Page 6: Table Of Contents

    6.2.4. Timing of Host Interface (Ultra DMA) ---------------------------------------------------------------------- 18 6.3. Connector ------------------------------------------------------------------------------------------------------------- 19 6.4. Support Command List -------------------------------------------------------------------------------------------- 21 7. Power Requirements ----------------------------------------------------------------------------------------------------- 22 7.1. Source Voltage ------------------------------------------------------------------------------------------------------ 22 7.1.1. Spike -------------------------------------------------------------------------------------------------------------- 22 7.1.2. Ripple --------------------------------------------------------------------------------------------- 7 ----------------------------------------------------------------------------------------------------------- 22 SD-R5112 Rev.1.0...
  • Page 7 ------------------------------------------------------------------------------------------------------ 26 13. Safety Standards/Agency Approvals 14. Electrostatic Discharge 15. Accessories -------------------------------------------------------------------------------------------------------------- 27 16. Packaging ----------------------------------------------------------------------------------------------------------------- 27 17. CE Declaration of conformity ------------------------------------------------------------------------------------------- 22 --------------------------------------------------------------------------------------------- 23 ---------------------------------------------------------------------------------------- 24 --------------------------------------------------------------------------------- 24 ------------------------------------------------------------------------------------------- 26 --------------------------------------------------------------------------- 27 ---------------------------------------------------------------------------------------------- 27 -------------------------------------------------------------------------------------- 27 SD-R5112 Rev.1.0...
  • Page 8: Introduction

    1. Introduction This document describes TOSHIBA's SD-R5112 DVD-R/-RW Drive. 2. Features This drive reads DVD CSS (Contents Scramble Systems) Disc. This drive reads digital data stored on CD-ROM, DVD-ROM and CD audio discs. This drive read and records the digital data on DVD-R/-RW and CD-R/RW discs.
  • Page 9: Specifications

    : 3.679 GB (3.950 Billion Byte) : 4.377 GB (4.700 Billion Byte) : 4.377 GB (4.700 Billion Byte) : 4.377 GB (4.700 Billion Byte) : 656.5 MB (688.4 Million Byte) : 748.8 MB (785.2 Million Byte) 2/29 Byte) SD-R5112 Rev.1.0...
  • Page 10 : Mode-1 CAV 1,294-3,000 KByte/s PCAV 600-900 KByte/s : Mode-2 CAV 1,475-3,422 KByte/s PCAV 684-1,026 KByte/s 16.7 MByte/s (PIO Mode 4 ) 16.7 MByte/s ( Multiple word DMA transfer mode-2) 33.3 MByte/s (Ultra DMA mode-2) 3/29 Byte=1,048,576 Bytes) SD-R5112 Rev.1.0...
  • Page 11 : 105 ms Typ DVD-RAM* : 160 ms Typ DVD* : 210 ms Typ : 180 ms Typ DVD-RAM* : 400 ms Typ : 2.0 s Typ DVD-RAM : 2.0 s Typ : 2.0 s Typ 2,048 KByte 4/29 SD-R5112 Rev.1.0...
  • Page 12: Environmental Conditions

    (7) Operating Humidity (8) Storage Humidity (9) Shipping Humidity (10) Condensation *1: Excluding medium. *2: Packed in Toshiba original shipping package. (a) Electrical Load/Eject (Eject Button) (b) Load/Eject by ATAPI command (c) Emergency Eject Not Required 40 dB (IEC 179 A weighted at 1 m)
  • Page 13: Dust And Dirt

    490 m/s [50 G] (Half sine wave 11 ms) no damage ----- 0.6 m drop once for each 6-surfaces, 1-edge and 1-corner 1 drop at 0.4 m (Bottom side only) 6/29 0-p) 0-p) (0-p) X Y Z/30 min each SD-R5112 Rev.1.0...
  • Page 14: Installation Conditions

    (1) External Dimensions (W x H x D) (2) Mass (Weight) Figure 1 Installation position 146 mm x 41.5 mm x 189.5 mm (excluding bezel) 1.0 kg (Net) 11.0 kg (Bulk Packaged 10pcs.) 16.0 kg (Bulk Packaged 15pcs.) 7/29 *Probability SD-R5112 Rev.1.0...
  • Page 15 (Unit:mm) Figure 2-1 External Dimensions 8/29 SD-R5112 Rev.1.0...
  • Page 16 (Unit:mm) Figure 2-2 External Dimensions 9/29 SD-R5112 Rev.1.0...
  • Page 17: Reliabilities

    2 % of Power On Time (Writing/Seeking) 0.5 h 15,000 h or 5 years (earlier one) 10,000 times or more 20 times or more 20 times or more 1-Lens and 2-Laser System Brushless DC Motor DC Motor DC Motor 10/29 SD-R5112 Rev.1.0...
  • Page 18 Control Figure 3 Configuration 11/29 SD-R5112 Rev.1.0...
  • Page 19: Functions

    Main Data (2048B) Area Type: Data Area EDC (4B) Lead-in Area Lead out Area ID Data(4B) Layer Number: ID Data EDC(2B) Layer 0 Reserved (6B) Layer 1 Main Data (2048B) EDC(4B) ECC(160B) Minutes Second(0~59) 4 bytes Blocks(0~74) Mode SD-R5112 Rev.1.0...
  • Page 20: Cd-R/Cd-Rw Data Configurations

    Synchronization (4 bit) (8 bit) (8 bit) Frame (8 bit) (14 bit) ECC block address (3 bytes) Parity A (3 bytes) Field ID (1 bytes) Disc information or ECC block address (6 bytes) Parity B (3 bytes) 13/29 SD-R5112 Rev.1.0...
  • Page 21: Power On/Off Timing

    Driver IoH sink current Driver capacitive loading "Command" Receivable (Single Session Disc) "Check Condition" Status Figure 8 Initialization Sequence 12 mA 8 mA Table 1 Cable parameters 14/29 "Read-Command" Acceptable "Good" Status 0.46 m -400 µ 25 pF SD-R5112 Rev.1.0...
  • Page 22: Signal Summary

    Rs=22 OHM 0.4 V IOL=12 mA /INTRQ /HDRQ 8 pF Rx=infinity Rs=82 OHM 0.8 V /HWR, /HA0-2, Rx=47 kOHM Pullup Resistor(Ri) Rs=82 OHM /HDAK 8 pF Rx=infinity Rs=120 OHM /HRD Rx=10 kOHM Rs=82 OHM /HCS1,/HCS3 0.6 V 8 pF SD-R5112 Rev.1.0...
  • Page 23: Timing Of Host Interface (Pio)

    Addr valid to IOCS 16-assertion Addr valid to IOCS 16-negation DIOR/DIOW-to address valid hold Read Data Valid to IORDY active IORDY setup time IORDY pulse wide Figure 10 Host Interface Timing 16/29 Min Time (ns) Max Time (ns) 1250 SD-R5112 Rev.1.0...
  • Page 24: Timing Of Host Interface (Dma Multi)

    DMACK to DIOR-/DIOW- setup DIOR-/DIOW- to DMACK hold DIOR- negated pulse width DIOW- negated pulse width DIOR- to DMREQ delay DIOR- to DMREQ delay Figure 11 Host Interface Timing (DMA Multi) Min time (ns) 17/29 Max time (ns) SD-R5112 Rev.1.0...
  • Page 25: Timing Of Host Interface (Ultra Dma)

    Data setup time (at recipient) Data hold time (at recipient) Figure 12 Host Interface Timing (Ultra DMA) t2CYC tCYC tCYC t2CYC tDVS tDVH tDVS tDVH tDVS tDVH t D H 18/29 tMLI tACK tRFS tDVS tDVH Min time (ns) Max time (ns) SD-R5112 Rev.1.0...
  • Page 26: Connector

    : GND PIN #4 : +5 V 13.21 2.54 2.54 ANALOG AUDIO CONNECTOR DIGITAL AUDIO CONNECTOR 56.38 2.54 48.25 +/-0.5 120.3 MODE SELECT INTERFACE HEADER CONNECTOR Figure 13 19/29 21.18 (2.4) 10.09 POWER SUPPLY CONNECTOR (4P ) SD-R5112 Rev.1.0 2.54...
  • Page 27 Host Interrupt Request Host 16 BIT I / O Host Address Bus BIT 1 Passed Diagnostics Host Address Bus BIT 0 Host Address Bus BIT 2 Host CHIP Select 0 Host CHIP Select 1 Drive Active/Drive 1 Present 20/29 SD-R5112 Rev.1.0...
  • Page 28: Support Command List

    Send Event Send Key Report Key Play Audio (12) Set Read Ahead Read (12) Write (12) Get Performance Read DVD Structure Set Streaming Read CD MSF SCAN Set CD Speed Mechanism Status Read CD Send DVD Structure 21/29 SD-R5112 Rev.1.0...
  • Page 29: Power Requirements

    +12 V 60 mA (DVD/CD) 60 mA (DVD/CD) 600 mA (DVD) 700 mA (CD) 300 mA (DVD) 600 mA (DVD) 720 mA (CD) 750 mA (DVD) 850 mA (CD) 1,600 mA (DVD) 1,600 mA (CD) 450 mA 350 mA SD-R5112 Rev.1.0...
  • Page 30: Cd Audio

    20 Hz to 20 kHz +/-3 dB -73 dB (at 1 kHz JIS A-Weighted) 80 dB Typ. (IEC 179 A-weighted) 0.50 V (p-p) Unbalanced 75 OHM Analog Audio Figure 14 0.90 V (rms) Typ. Continuous Type (Thumb Wheel Knob) 100 OHM (Nominal) 23/29 SD-R5112 Rev.1.0...
  • Page 31: Device Configuration Jumper

    The device shall use the host interface signal CSEL to configure the device. (b) MA (Master): Default Position The device shall use for the Master. Default Mode is 'MA'. (c) SL (Slave) The device shall use for the Slave. Cable CSEL Figure 15 24/29 Drive CSEL SD-R5112 Rev.1.0...
  • Page 32: Busy Indicator

    (3) When performing 'Data Access' and during 'Data Transfer' and 'Write', Busy Indicator keeps turn on. Light On Light Off Figure 16 Idle Light Off Figure 17 No disc Light On Figure 18 Media Problem Figurer 19 CD-Audio playback Figurer 20 Data Access and Data Transfer 25/29 SD-R5112 Rev.1.0...
  • Page 33: Connections

    40 core type 100 OHM +/-10 % (without shield) Max. of 0.46 m for total ATAPI bus length Unbalanced and shielded Less than 1000 pF Max. 3 m diameter 1.0 to 1.5 mm Figurer 21 Insert the bar 26/29 SD-R5112 Rev.1.0...
  • Page 34: Safety Standards/Agency Approvals

    (Transportation with bulk package is not allowed.) 28 bulk packs on one pallet. *All transportation is allowed with pallet. (Transportation with bulk package is allowed.) 27/29 Immunity characteristices Limits and methods of masurement] 1 kHz 80 % AM ] f: 5 kHz, Polarity: +/-] SD-R5112 Rev.1.0...
  • Page 35 Model: Options: Toshiba declares that the above mentioned product(s) with or without the listed options comply to the EU-Directives and standards as listed on page 2. Last two digits of the year in which the CE mark affixed : 03...
  • Page 36 29/29 SD-R5112 Rev.1.0...
  • Page 37 5 % to 95 % (Wet bulb Maximum Temperature 40 C) 50 mA (DVD/CD) 80 mA (DVD/CD) 520 mA (DVD) 540 mA (CD) 450 mA (DVD) 480 mA (DVD) 520 mA (CD) 500 mA (DVD) 550 mA (CD) 1,200 mA (DVD)) 1,200 mA (CD) SD-R5112 Rev.1.0...
  • Page 38 600 mA 60 mA (DVD/CD) 60 mA (DVD/CD) 600 mA (DVD) 700 mA (CD) 300 mA (DVD) 600 mA (DVD) 720 mA (CD) 750 mA (DVD) 850 mA (CD) 1,600 mA (DVD) 1,600 mA (CD) 450 mA 350 mA SD-R5112 Rev.1.0...