TOSHIBA DVD-RAM SD-W1111
11. Front bezel
11.1 Standard Bezel
The front view of the drive with a standard bezel
Load/Unload switch:
Push when ejecting/pulling-in the tray
Emergency disc eject hole:
When ejecting a disc with power turned off, insert an exclusive tool to eject a disc. (Refer to 15.3)
LED:
"BUSY" (orange):
"RAM" (green):
"ROM" (green):
11.2 LED lighting
Closing the tray, "BUSY" LED lights and the drive status becomes as follows;
(1) A disc is loaded and the drive status becomes "Ready", "RAM" LED or "ROM" LED turns on
according to the disc type and "BUSY" LED turns off.
"ROM" or "RAM"
"BUSY"
(2) A disc is loaded but the drive status doesn't become "Ready", all LEDs turn off.
"ROM" or "RAM"
"BUSY"
LED: "ROM" "RAM" "BUSY"
Lights when the drive operates.
Lights when DVD-RAM disc is loaded.
Lights when either of DVD-ROM, DVD-R or CD-** is loaded.
Page 19
'99/06/26
Load/Unload switch
all LEDs turn off
Product Specification
OD-A017-02
1.0
Version
Emergency
disc eject hole