AERMEC NXW Usage Manual page 53

AFTER-SALES ASSISTANCE menu
The after-sales assistance menu contains some sub-menus that are protected by a password. These
!
sub-menus are not available to the user and their management is only allowed by staff authorised for
after-sales assistance of the unit.
AFTER-SALES ASSISTANCE menu - LANGUAGE CHANGE sub-menu - Language selection
Visualisation on unit display
A
Language
B
Language:
C
ENTER to change
AFTER-SALES ASSISTANCE menu - LANGUAGE CHANGE sub-menu - Enabling of language selection on start-up
Visualisation on unit display
A
Language
B
Disable language mask
at start-up:
C
Show mask time:
AFTER-SALES ASSISTANCE menu - INFORMATION sub-menu - Display of system information
Visualisation on unit display
A
Information
Aermec S.p.A.
B
code:Aerchiller
Ver.:2.2
Bios:4.35
Boot:4.01
AFTER-SALES ASSISTANCE menu - BOARD CHANGE sub-menu - Display of board address
Visualisation on unit display
A
Board switch
Unit address:1
B
1
17
Index
A
B
C
ENGLISH
Index
A
B
C
NO
20s
Index
A
B
19/03/10
10/09/09
13/04/06
Index
A
B
16
32
Display
Language: Indicates the system language.
Language: indicates which language is set for the display.
Control: indicates the control for modifying the system lan-
guage.
Parameters that can be modified by the user
Display
Language: Indicates the system language.
Control: indicates the possibility to enable or disable the sys-
tem language selection at every unit start-up.
Display time: indicates the time within which it will be possible
to select the system language during the start window. If the
language selection window option is disabled on start-up, this
parameter will not be visible.
Parameters that can be modified by the user
Display
Information: Indicates information regarding the system.
This window indicates some information linked to the control
system hardware.
Display
Board change: Indicates the address of the board.
This window indicates the address of the control board.
53