Synchronizing Simpad With Simstore; Patient Monitor - laerdal SimPad Directions For Use Manual

SYNCHRONIZING SIMPAD WITH SIMSTORE

After SimPad has been registered on SimStore, the SimStore Icon on the start screen becomes a
Synchronize selection. Synchronize will download scenarios assigned to this SimPad on SimStore.
Administration of the SimPad and purchasing of scenarios on SimStore must be done from a PC.

PATIENT MONITOR

SimPad System can work with a Laerdal Simulated Patient Monitor. The patient monitor can show
ECG, SpO2, BP, Respiration rate, and Temperature from the SimPad.
The Monitor software needs to connect to the desired Link Box through a network connection,
wired or wireless.
When the PC is set up on the same network as the Link Box, start the Patient Monitor software on
the PC and select the desired Link Box from the selection dialogue.
The monitor software will remember its last connection, and try to reconnect to the same Link Box
the next time it is started.
To change to another Link Box, select "Connection Settings" from the Main Setup menu.
20