Samwontech TEMP2000 Series Installation Manual page 71

SAMWONTECH
10.1.2 Application Range Setup Screen-2
▶ This screen is able to setup Control Characteristic related Parameters in controlling PID, and can copy
Constants between PID Groups.
①
②
③
① Set the use of Tuning Key.
☞ Refer to [Figure 3-5 Fix Operation Screen-1] and [Figure 3-9 Program Operation Screen-1] in
[Operation Manual]
② Select PID Mode.
③ Select Standard when using Zone PID.
④ Select the Source PID Groups to copy.
⑤ Select the Source PID Group Number to copy.
☞ All PID values are copied when Source PID is 1 ~ 6, and Target PID is 1 ~ 6 or 0(ALL).
⑥ Copy selected PID Constant.
Table 10-2 PID Group Setup Screen-2 Parameter
Parameter
Tuning Key Display
PID Selection Mode
Zone PID Decision
PID Copy Source CH
COPY
PID Copy Source Group No.
2nd Edition of TEMP2000_Series IM : July. 16. 2010
[Figure 10-2] PID Application Range Setup Screen-2
Hide, Display
Seg, Zone
Range Unit
ABS
ABS
PV, SP ABS
1 ~ 6
0 ~ 6
④
⑤
⑥
Default
Display
Seg
PV
1
1
Page 68 / 87