Troubleshooting - Prince Castle DCFT-MINI-MCD Series Operation Manual

Vertical Artisan Toaster
DCFT-MINI-MCD Series
Keep hands and objects out of the toaster unit! Failure to exercise caution may result in serious injury!
Turn the unit off, unplug it and let it cool down completely before touching or working on internal apparatus. The
plug removed from the outlet shall remain clearly visible to the operator during the maintenance procedure
PROBLEM
Unit will not heat up
Unit heats up, but the conveyor does
not run
Unit under-and over-heats, but does
not respond to programming.
Buns under-or over-done.
MINI-DCFT-MCD Series
Troubleshooting Steps
WARNING
BURN/ELECTRICAL SHOCK HAZARD!
Platen is HOT and can cause severe burns or severe shock.
Master Display Messages
PROBABLE CAUSE
No power to unit.
Inoperable power cord
Loose connection on power switch
Inoperable power switch
High limit switch tripped
Inoperable Temperature Probe
Inoperable Platen
Loose motor switch connection.
Inoperable motor.
Inoperable motor switch.
Stripped drive gear
Loose chain sprockets
Check temperature settings
Inoperable temperature probe
Check platen adjustment. See opera-
tion manual
Check conveyor temperature. From
READY screen, press the INFOR-
MATION button to display the actual
platen temperature.
Improper toast time.
SOLUTION
Ensure power cord is connected to
proper receptacle.
Call for service
Call for service
Call for service
Reset high level switch
Call for service
Replace Platen.
Call for service
Call for service
Call for service
Call for service
Call for service
Adjust temperature set point setting.
See management programming.
Call for service
Move platen adjustment knobs to the
correct product part setting.
Adjust temperature set point setting.
See management programming.
Adjust toast time as needed.
9 Printed in USA 06/04/2019
353-985 Rev. E