Installation - Prince Castle DCFT-MINI-MCD Series Operation Manual

Vertical artisan toaster
Table of Contents

Advertisement

Vertical Artisan Toaster
DCFT-MINI-MCD Series
Unpack and inspect. Remove the unit from the carton
1
and inspect for signs of damage. If there is damage to the
unit:
• Notify the carrier within 24 hours of delivery.
• Save carton and packaging materials for inspection
purposes.
• Contact your local dealer, or if purchased directly,
the Prince Castle Sales Department at 1-800-722-7853 or
630-462-8800 to arrange for a replacement unit.
CAUTION
DO NOT LIFT UNIT BY THE BUTTER WHEEL.
EITHER LIFT FROM DOORS, OR THE
BOTTOM OF THE UNIT
Verify parts. Verify that all parts have been received:
2
• Dual Continuous Feed Toaster with two conveyors.
• Release Sheet Kit.
Place toaster on flat surface. Remove blue and/or white
3
protective covering.
Remove packing. Remove the cardboard spacer holding
4
the conveyors up for shipping.
Insert the release sheet as shown in Figure 1.
5
Install the release sheet retaining bracket as shown in Figure
6
2.
MINI-DCFT-MCD Series

Installation

Plug in Unit into a grounded
7
receptacle
All electrical connections must be in accordance with local
electrical codes and any other applicable codes.
3
WARNING
Figure 1
Figure 2
Printed in USA 06/04/2019
353-985 Rev. E

Advertisement

Table of Contents
loading

Table of Contents