Advertisement
TROUBLESHOOTING CHART
PROBLEM
High limit tripped.
No power.
Toaster conveyor not
turning.
Conveyor chain binds
up in operation.
Toaster overheating.
Upper and lower heat
tubes not heating.
Bread product burning.
Bread product too light.
Lower heat tubes heating
but top tubes are not.
CAUTION: Turn off power switch, unplug toaster from wall outlet, and let toaster cool down
before doing any repairs. All repairs should be done by a qualified service technician.
All manuals and user guides at all-guides.com
CAUSE
Toaster overheating due to
blockage of airflow.
Airflow fan inoperable.
Circuit breaker tripped.
Power switch inoperable.
Broken wire in power cord.
Conveyor motor inoperable.
Conveyor switch inoperable.
Motor chain is loose
Sprockets worn.
Excessive slack in conveyor
chain.
Airflow blockage.
Airflow fan inoperable
Heater switch inoperable.
Heater tube inoperable.
Conveyor speed too slow.
Conveyor speed too fast.
High Limit Switch Tripped
5
SOLUTION
Clean any debris from the fan guard
that might be blocking the flow.
Replace fan .
Reset circuit breaker.
Replace power switch.
Replace power cord.
Replace motor.
Replace speed switch.
Retension motor chain.
Replace sprockets.
Remove a chain link.
Clean any debris from fan guard
Replace fan motor.
Replace heater switch.
Replace heater tube.
Adjust to proper settings
Adjust to proper settings
See High Limit Tripped section
Advertisement
