Table of Contents
Advertisement
APPENDIx 9: SECONDARY AIR TUBES AND BAFFLE INSTALLATION
1.
Starting with the rear tube, lean and insert the right end
of the secondary air tube into the rear right channel
hole. Then lift and insert the left end of the tube into
the rear left channel.
Note that secondary air tubes (A) can be replaced
without removing the baffle board (B).
Page 64
2.
Align the notch in the left end of the tube with
the key of the left air channel hole. Using a
«Wise grip» hold the tube and lock it in place
by turning the tube as shown. Make sure the
notch reaches the end of the key way.
3.
Repeat for center back tube.
4.
Put the baffle in place.
5.
Repeat steps 1 and 2 for the two front tubes.
6.
To remove the tubes use the above steps in
reverse order.
B
A
Installation and Operation Manual - Stratford II
Hide quick links:
Advertisement
Table of Contents
