Brs 19-Inch 1U - Rack Mounting Instructions; Identifying The Sections Of The Rack Rails; Inner Rails/Inner Rail Extensions - Bosch BRS Quick Installation Manual

14 en | System Hardware Setup
2.4

BRS 19-inch 1U - Rack Mounting Instructions

This section provides information on installing the chassis into a rack unit. There are a variety
of rack units on the market, which may mean the assembly procedure will differ slightly. You
should also refer to the installation instructions that came with the rack unit you are using.
Note:
This rail will fit a rack between 26" and 33.5" deep.
2.4.1

Identifying the Sections of the Rack Rails

The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections:
–
–
1
2
2.4.2

Inner Rails/Inner Rail Extensions

The chassis includes a set of inner rails which are in two sections:
–
–
The inner rails are pre-attached and do not interfere with normal use of the chassis if you
decide not to use a server rack. Attach the inner rail extension to stabilize the chassis within
the rack.
XMD-0041-VV002 | V1 | 2011.10
an inner fixed chassis rail that secures directly to the system chassis
an outer fixed rack rail that secures directly to the rack itself.
Rail Extension (Inner Rail is pre-installed on the chassis)
Outer Rails
inner rails
inner rail extensions.
Quick Installation Guide
Bosch Recording Station Appliance
Bosch Security Systems