Table of Contents
Advertisement
20
en | System Hardware Setup
2.5.4
Installing the Chassis into a Rack
1.
2.
3.
4.
2.6
Starting the System for the First Time
Provide input power to the system.
1.
2.
XMD-0041-VV002 | V1 | 2011.10
Extend the outer rails as illustrated above.
Align the inner rails of the chassis with the outer rails on the rack.
Slide the inner rails into the outer rails, keeping the pressure even on both sides. When
the chassis has been pushed completely into the rack, it should click into the locked
position.
Optional screws may be used to secure the to hold the front of the chassis to the rack.
Plug the power cords from the power supply unit into a high-quality power strip that
offers protection from electrical noise and power surges. We recommended using an
uninterruptible power supply (UPS).
Press the power button on the front panel to start the system.
The Set Up Windows screen is displayed where you can select the language of the
system (see Section 3.1 Logging on to the System for the first time, page 21).
Quick Installation Guide
Bosch Recording Station Appliance
Bosch Security Systems
Advertisement
Table of Contents
