Rack Mounting Instructions; Separating The Sections Of The Rack Rails - Bosch DIP-7080-00N Installation Manual

26 en | Rack installation
4.3

Rack mounting instructions

This section provides information on installing the chassis into a rack unit. There are a variety
of rack units on the market, which may mean the assembly procedure will differ slightly. You
should also refer to the installation instructions that came with the rack unit you are using.
Notice!
This rail will fit a rack between 26" and 33.5" deep.
4.3.1

Separating the sections of the rack rails

The chassis package includes two rail assemblies in the rack mounting kit. Each assembly
consists of two sections:
–
–
To separate the inner and outer rails:
1.
2.
3.
2013.09 | V2 | DOC
an inner fixed chassis rail that secures directly to the chassis
an outer fixed rack rail that secures directly to the rack itself.
Locate the rail assembly in the chassis packaging.
Extend the rail assembly by pulling it outward.
Press the quick-release tab.
Installation Manual
DIVAR IP 7000 2U
Bosch Sicherheitssysteme GmbH