Configuring The Network Manually - Toshiba IK-WB11A Basic User's Manual

Configuring the Network Manually

● Entering an IP address manually
・Enter an IP address manually if you are not using, or do not want to
use the DHCP server.
・If you use a DHCP server, the IP address changes from time to time.
Therefore, the IP address you set last time may not be valid next
time, and you may not able to access to the camera.
To be able to access the camera every time you use, you need to
set fixed IP address (setting IP address manually) to the network
camera. If you do not know the pre-assigned IP address,consult the
relevant support center or refer to the relevant manuals of the
network system devices (router, hub, modem,etc.).
Perform administrator login (→ page 42) to open
the Admin menu.
In the left side of the window, click the toggle (＋)
of "Network Settings"
・The sub menus appear.
From the list of sub menus, click "General"
・The settings appear in the right side of the window.
36